Fiber optic cable
As a manufacturer of Fiber Optic Cable, Latitude has a dedicated area specifically for the manufacturing of all our fiber cable, fiber optic cable, Multi Fiber Optic Cable , LE-GYTS Outdoor Fiber Optic Cable ISO Approved etc. Contact Now.
LE PE Jacket Outdoor Fiber Optic Cable FTTH 12 - 244 Core For Engineering
LE-GYXTW
The bers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are lled with a water-resistant lling compound.The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The parallel steel wires are placed at the two sides tape. The cable is completed with a polyethylene (PE) sheath.

Black Multi Fiber Optic Cable , LE-GYTS Outdoor Fiber Optic Cable ISO Approved
LE-GYTS
The bers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are lled with a water-resistant lling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high ber count, locates in the center of core as a metallic strength member. Tubes (and llers) are stranded around the strength member into a compact and circular cable core. The PSP is longitudinally applied over the cable core, witch is lled with the lling compound to protect it from water ingress. Then, the cable is completed with a PE sheath.

Fire Resistant Digital Composite 250μM Fiber Optic Cable
LE-GYTA53
The bers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are lled with a water-resistant lling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high ber count, locates in the center of core as a metallic strength member. Tubes (and llers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, witch is lled with the lling compound to protect it from water ingress. Then, the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.

Coaxial Multimode Fiber Optic Cable , Terminating Fiber Optic Cable Plastic
LE-GYTC8S
The bers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are lled with a water-resistant lling compound.A steel wire locates in the center of core as a metallic strength member. The tubes (and llers) are stranded around the strength member into a compact and circular cable core.After an Aluminum Polyethylene Laminate (APL) moisture battier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE) sheath to be gure 8 structure.

Single Core Multi Fiber Optic Cable , Fiber Count 2-288 Multimode Patch Cable
LE-ADSS
ADSS cable is loose tube stranded. Fibers, 250μm, are positioned into a loose tube made of high modulus plastics. The tubes are lled with a water-resistant lling compound. The tubes (and llers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is lled with lling compound, it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member,the cable is completed with PE or AT(anti-tracking) outer sheath.

Fiber Optic Cable For Telecommunication
LE-GJFJV-1F
GJFJV simplex cable use single Φ900μm or Φ600μm fame-retardant tight buer ber as optical communication medium, the tight buer ber wrapped with a layer of aramid yarn as strength member units, and the cable is completed with a PVC or LSZH (Low smoke, Zero halogen, Flame-retardant) jacket.

Fiber Optic Cable Coaxial Type For Telecommunication
LE-GJFJV-2F
GJFJV zipcord interconnect cable use Φ900μm or Φ600μm fame-retardant tight buer ber as optical communication medium, the tight buer ber wrapped with a layer of aramid yarn as strength member units, and the cable is completed with a gure 8 PVC or LSZH(Low smoke, Zero halogen, Flame-retardant) jacket.

Multimode Armored Ftth Fiber Optic Cable 12 Core Coaxial Type For Telecommunication
LE-GJFJV
GJFJV multi-purpose distribution cable use several Φ900μm fame-retardant tight buer ber as optical communication medium, the tight buer ber wrapped with a layer of aramid yarn as strength member units, and the cable is completed with a PVC or LSZH (Low smoke, Zero halogen,Fame-retardant) jacket.

MPC Fiber Cable of Fiber Optic Cabling System
LE-MPC
MPC multi-purpose distribution cable use 6-ber subunits (Φ900μm tight buer ber, aramid yarn as strength member). A ber reinforced plastic (FRP) locates in the center of core as a non-metallice strength member. The subunits are stranded around the cable core. The cable completed with a LSZH (Low smoke, Zero halogen, Flame-retardant) jacket.

GJBFJV Multi Fiber Optic Cable Moisture - Proof Crush Resistant CE Approved
LE-GJBFJV
GJBFJV mulit-purpose break-out cable use simplex cable (Φ900μm tight buer, aramid yarn as strength member) as subunit. A ber reinforced plastic (FRP) locates in the center of core as a non-metallic strength member. The subunits are stranded around the cable core.The cable is completed with a PVC or LSZH (Low smoke, Zero halogen, Flame-retardant) jacket.

GJA Waterproof Pigtail Indoor Fiber Optic Cable Tight
LE-GJA
GJA waterproof pigtail cable use simplex cable (Φ900μm tight buer ber, around yarn as strength member) as subunit. A ber reinforced plastic (FRP) locates in the center of core as a non-metallic strength member. The subunits are stranded around the cable core. An aluminum polyethylene laminate is applied around the cable core. The cable is completed with a PE jacket.

Flat Indoor FTTH Drop Cable GJXFH
LE-GJXFH
The optical ber unit is positioned in the centre. Two parallel Fiber Reinforced (FRP) are placed at the two sides. Then, the cable is completed with a black or color LSZH sheath.

GJYXFCH Self-Supporting GFRP Drop cable
LE-GJYXFCH
The optical ber unit is positioned in the centre. Two parallel Fiber Reinforced (FRP) are placed at the two sides. A steel wire as the additional strength member is also applied. Then, the cable is completed with a black or color LSZH sheath.

GJYXCH Self-Supporting Drop cable
LE-GJYXCH
The optical ber unit is positioned in the centre. Two parallel Fiber Reinforced (Steel Wire) are placed at the two sides. A steel wire as the additional strength member is also applied. Then, the cable is completed with a black or color LSZH sheath.

Gjxfha Fiber Optic Cable FTTH Drop Cable for Duct
LE-GJXFHA
The optical ber unit is positioned in the centre, two parallel ber Reinforced (FRP) are placed at the two sides. Then, the cable is completed with a black or LSZH sheath.
